Radioactive smoke detectors? Homes have many hazards in them and radioactive material is just another item. Households upon seeing the symbol for radioactive or reading up on disposal are confused as to how to handle such items. Hopefully after reading this page it will assist you with how to handle them. If you have any questions please call us at 512-864-3240.
“Smoke detectors and alarms are important home safety devices. Ionization chamber and photoelectric smoke detectors are the two most common types available commercially. Because these pages are most concerned with radiation protection, we will focus mainly on the ionization chamber technology.
Ionization chamber smoke detectors contain a small amount of radioactive material encapsulated in a metal chamber. They take advantage of the ions created by ionizing radiation to develop a low, but steady electrical current. Smoke particles entering the chamber disrupt the current and trigger the detector’s alarm. Ionization chamber detectors react more quickly to fast flaming fires that give off little smoke.
- How Do Smoke Alarms Work?: Ionization Technology
- How Do Smoke Alarms Work?: Photoelectric Technology
How much radiation is in smoke detectors?
The radiation source in an ionization chamber detector is a very small disc, about 3 to 5 millimeters in diameter, weighing about 0.5 gram. It is a composite of americium-241 in a gold matrix. The average activity in a smoke detector source is about one microcurie, 1 millionth of a curie.
Americium emits alpha particles and low energy gamma rays. It has a half-life of about 432 years. The long half-life means that americium decays very slowly, emitting very little radiation. At the end of the 10 year useful life of the smoke detector, it retains essentially all its original activity.
How much radiation exposure will I get from a smoke detector?
As long as the radiation source stays in the detector, exposures would be negligible (less than about 1/100 of a millirem per year), since alpha particles cannot travel very far or penetrate even a single sheet of paper, and the gamma rays emitted by americium are relatively weak. If the source were removed, it would be very easy for a small child to swallow, but even then exposures would be very low because the source would pass through the body fairly rapidly (by contrast, the same amount of americium in a loose powdered form would give a significant dose if swallowed or inhaled). Still, it is not a good idea to separate the source from the detector apparatus.
Owning and operating a smoke alarm
Regardless of the detection technology used in your smoke alarm, the product label, User’s Manual or Warranty should state the expected useful life of the smoke detector. For example, smoke alarms with the UL label have been certified with an expected useful life of 10 years. The product label also will tell you whether this includes the useful life of the battery. If you do not have a lithium long life battery (10 years), fire officials recommend that you change your batteries at the same time you turn your clock back each year for the end of Daylight Saving Time. It’s also important to make sure your smoke alarm is working properly. You should test the alarm periodically (there should be a button to press). But be very careful if you use a source of smoke to test the detector.
Smoke alarm and heat detector (which senses the heat from a fire to trigger an alarm or sprinkler system, but does not detect smoke) technologies are all relatively inexpensive for a homeowner. A smoke alarm can usually be purchased for $10 to $25. Many companies make separate products using either photoelectric or ionization technologies, or they combine the technologies in one product. Read the packaging and label material on the product. Smoke and heat detector technologies may also be combined with home break-in alarm equipment to provide a total home security system connected to your local fire and police services. Whether you choose an electrical or battery operated model, you must follow the manufacturer’s recommendations for installation, testing and maintenance to get maximum protection.” Source is EPA Website
Below is a screen shot from the USPS website where they have compiled a list of manufacturers of Radioactive smoked detectors and how to return them. Again if you have any questions please Contact Us at 512-864-3240 and hopefully we can assist you.